Fresnel lens Ø 120 for LED 2000 series
Product information "Fresnel lens Ø 120 for LED 2000 series "
If the Fresnel lens is damaged, it can be replaced.
Disconnect the light from the power supply, remove the four screws (6 x 16 mm) on the front panel, and take it off. Loosen the four mounting screws with washers and nuts, remove the old lens, and insert the new one. Reattach the front panel using the four screws.
Disconnect the light from the power supply, remove the four screws (6 x 16 mm) on the front panel, and take it off. Loosen the four mounting screws with washers and nuts, remove the old lens, and insert the new one. Reattach the front panel using the four screws.
No properties
Hersteller/Manufacturer:
Verantwortliche Person/Responsible f. Product Safety:
HEDLER Systemlicht GmbH
Heerstraße 112
65594 Runkel
E-Mail: info@hedler.com